QATD200-260 Series Farm Tractor Front Drive Axle
Characteristics:
- Introduce advanced technology of foreign wheeled tractors.
- Adopt middle drive shaft and swing central swing pin.
- Internal structure includes central deceleration, differential, constant speed direction and terminal planetary deceleration.
- Integral bridge housing with good rigidity. It is a two-stage deceleration structure with large output torque.
- Adopt compact multi-page latch, lock balance, smooth operation.
- Centralized steering cylinder with more compact structure.
- Double-acting independent oil circuit, full hydraulic front wheel steering, turning angle up to 55 degrees.
- Adapt 200-260 HP four-wheel drive tractor.
Technical parameter
| Front wheel maximum turning angle | 55° | Steering cylinder diameter (mm) | 75 | |
| Total speed ratio | 17.6 | Steering cylinder stroke (mm) | 138×2 | |
| Front wheel alignment parameters | Front wheel camber | 1° | Cylinder tubing interface | M18×1.5 |
| Kingpin inclination angle | 7° | Max pressure of oil cylinder(MPa) | 18 | |
| Kingpin inclination angle | 6° | Rated load (Kg) | 7000 | |
| Front Wheel Front Bundle (mm) | 0-2 | |||


