QATD160-220 Series Farm Tractor Front Drive Axle
Characteristics:
- Introduce advanced technology of foreign wheeled tractors.
- Adopt middle drive shaft and swing central swing pin.
- Internal structure includes central deceleration, differential, constant speed direction and terminal planetary deceleration.
- Integral bridge housing with good rigidity. It is a two-stage deceleration structure with large output torque.
- Adopt compact multi-page latch, lock balance, smooth operation.
- Centralized steering cylinder with more compact structure.
- Double-acting independent oil circuit, full hydraulic front wheel steering, turning angle up to 55 degrees.
- Adapt 160-220 HP four-wheel drive tractor.
Technical parameter
| Front wheel maximum turning angle | 55° | Steering cylinder diameter (mm) | 75 | |
| Total speed ratio | 20.769 | Steering cylinder stroke (mm) | 138×2 | |
| 17.574 | ||||
| Front wheel alignment parameters | Front wheel camber | 1°30" | Cylinder tubing interface | M18×1.5 |
| Kingpin inclination angle | 7° | Differential Lock Control Oil Port | M14×1.5 | |
| Kingpin inclination angle | 6° | Differential Lock Manipulates Oil Pressure | 2MPa | |
| Front Wheel Front Bundle (mm) | 0-2 | Rated load (Kg) | 7500 | |


